Seco Tools, LLC
2805 Bellingham Drive
Troy,
MI
48083
US
Connect
- Visit Company Website
- 248-528-5200
- Contact
NEW PCBN GRADES
Seco Expands Solutions for Hard Turning with New PCBN Grades
Seco Tools has expanded its family of PCBN insert grades to cover the entire spectrum of hard part turning applications. Using a new bimodal substrate and nanolaminate coating process, these new inserts extend tool life and increase productivity in a broader range of applications.
Seco’s PCBN grade chain for materials ranging from ISO H05 to H35 consists of CH0550, CBN060K, CH2540 and CH3515 and is designed specifically for turning hardened steels. They incorporate advanced coatings and a bimodal substrate with coarser grain materials, along with optimized cutting edge profiles for long and predictable machining performance.
CH0550 provides prolonged wear resistance in high-speed continuous cut H05 operations. CBN060K excels in continuous to slight interrupted cuts in H15 applications.
CH2540 offers unparalleled performance in continuous and moderate interrupted cuts in the H25 area. CH3515 exhibits extreme toughness handling heavy interruptions in H35 operations.
Each of Seco’s PCBN grades is available in common ISO insert geometries in both metric and imperial specifications. High feed wiper geometry options are available to further enhance performance.
A Message from Seco Tools, LLC
Seco Re-engineers Perfomax to Further Optimize Drilling Performance
With a new re-engineered design, the Seco Perfomax indexable insert drill delivers higher drilling parameters and longer tool life as well as exceptional chip control and evacuation.
New Seco Feedmax –P Goes Above and Beyond Drilling Technology
With the new Seco Feedmax –P drill, manufacturers gain the potential to significantly boost holemaking performance beyond that of current drilling technology for ISO P (steel), as well as cast-iron, workpiece materials.
New Seco End Mills Boost Material Removal Rates for a Wide Range of Materials
Seco Tools recently released two new solid-carbide end mills that significantly boost metal removal rates and offer exceptionally long tool life for a variety of today’s challenging workpiece materials.
Seco Increases Flute Options for Popular Jabro High-feed End Mill
Seco has expanded the high-feed machining applicability of its Jabro-HFM JHF980 solid-carbide end mill with new 4- and 5-flute options.
Solid-carbide End Mills with Smaller Neck Diameters Increase Application Range
The Jabro-Solid2 JS554 range of solid-carbide end mills gains further utility and versatility with smaller neck diameter options.
Niagara Cutter Stabilizer 2.0 Doubles Feedrates, Shortens Cycle Times
Niagara Cutter, a subsidiary of Seco Tools, LLC, recently launched its new Niagara Cutter Stabilizer 2.0 next-generation family of end mills.
New High Feed Cutter Boosts Material Removal Rates in Tough Materials
Seco Tools' High Feed 6 is the latest addition to the High Feed series of indexable-insert milling cutters specifically designed for difficult-to-machine materials.
As Seen In IMTS Show Daily
Cutting, Drilling, Trimming and Finishing Composites
There is one basic operation employed almost universally throughout the composites manufacturing industry: CNC machining.