Drill Master - Eldorado Tool Inc.
336 Boston Post Rd.
Milford,
CT
06460
US
Connect
- Visit Company Website
- 800-658-8855
- Contact
THE LEADER IN DEEP HOLE DRILLING MACHINES, TOOLS AND SERVICE
Single Flute - (Solid Carbide) Single flute solid carbide gundrills are constructed of a single piece of carbide with no braze joint at the head and tube transition. Solid carbide gundrills will yield greater tool life, more strength, rigidly, 2-3 times faster feed rates, and maximize your productivity. Due to its rigidity this tool enables much faster SFM without the whip factor therefore enabling increased feed rates. Stock diameters are available from .055” (1.397mm) to .070” (1.778mm) in lengths to 6.0” (152.4mm) Special diameters and lengths are available from .039” (1.0mm) - .1875” (4.762mm) in lengths up to 10” (254mm). Delivery is 2-3 weeks depending on carbide availability.
A Message from Drill Master - Eldorado Tool Inc.
THE LEADER IN DEEP HOLE DRILLING MACHINES, TOOLS AND SERVICE
• Straightness tolerances of .001” (.025mm) per foot • Concentricity tolerances of .001” (.025mm) per inch or better • Hole diameter tolerances of +/- .0005” (.0127mm) • Finish tolerances as low as 4 Ra • Burr free intersections • Consistent reproduction from hole to hole
THE LEADER IN DEEP HOLE DRILLING MACHINES, TOOLS AND SERVICE
DME Universal Bench Top Grinding Unit When shop foot prints make it difficult to place a tool and cutter grinder at a work station or to maximize the efficiency of an operator, our Bench Top Grinder can be set inside any work station and gundrills can be easily re-ground by the operator while a part is being drilled.